Euchner CES-A-W5H-01 097525

• Safety switch with integrated evaluation electronics
• Possible to switch pulsed signals
• 2 safety outputs (semiconductor outputs)
• Category 4/PL e according to EN ISO 13849-1
• Multicode

Approach directionCan be adjusted in 90° steps Multicode evaluationEvery suitable actuator is detected by the evaluation unit. Category according to EN ISO 13849-1Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

• Category 4/PL e according to EN ISO 13849-1

LED indicator

STATE	Status LED
OUT/ERROR	Safety outputs status / diagnostics LED (combined)

Additional connection

OUT	Monitoring output (semiconductor)

Attention:The operating distance may vary depending on the background material and installation situation. (Only in combination with actuator CES-A-BBA, CES-A-BCA) Typical operating distance For a side approach direction for the actuator and safety switch, a minimum distance of s = 4 mm must be maintained so that the operating distance of the side lobes is not entered. (Only in combination with actuator CES-A-BPA) Typical operating distance For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the operating distance of the side lobes is not entered.

Dimensions	According to EN 60947-5-2: (LxWxH) 131x40x40
Housing material	Plastic, PBT
Weight
Net	0,4 kg
Ambient temperature
At UB = 24 V DC	-20 ... 55 °C
Degree of protection	IP67
Mounting distance
Between 2 switches or 2 actuators	min.80 mm
Installation orientation	Any
Tightening torque
Screws fastening bracket read head	max.0,6 Nm
Fixing screws housing	max.1 Nm
Ready delay	max.3 s
Reaction time
After change in the actuation status	max.180 ms
Switching frequency	max.1 Hz
Dwell time	min.0,5 s
Connection	M12 plug connector, 8-pin, screen can be applied

Electrical connection ratings

Operating voltage DC	18 ... 24 ... 27 V DC Regulated, residual ripple < 5 %
Current consumption	80 mA
Fusing
(External) operating voltage	0,25 ... 8 A
Rated insulation voltage Ui	300 V
Rated impulse withstand voltage Uimp	max.1,5 kV
EMC protection requirements	In acc. with EN 60947-5-3
Degree of contamination (external, according to EN 60947-1)	3
	Safety outputs LA / LB
Type of output	Semiconductor outputs, p-switching, short circuit-proof, electrically decoupled
Output voltage
HIGH U(LA)	U(+LA) - 1,5 ... U(+LA) V DC
HIGH U(LB)	U(+LB) - 1,5 ... U(+LB) V DC
LOW U(LA) / U(LB)	0 ... 1 V DC
Output current
per safety output	1 ... 400 mA
Fusing
External, safety circuit U(+LA) / U(+LB)	0.4 A medium slow-blow
Utilization category according to EN 60947-5-2
DC-13	24V 400mA
Switching load
According to UL	max. DC 24 V, class 2
Rated conditional short-circuit current	max.100 A
Discrepancy time
(Between the operating points of both safety outputs)	max.120 ms
Power supply output load
U(+LA) / U(+LB)	24 V DC 18 ... 27 V DC
	Monitoring output OUT
Type of output	Semiconductor output, p-switching, short circuit-proof
Output voltage	0,8 x UB ... UB V DC
Output current	max.20 mA
	STATE LED
LED indicator	Status - LED
	LED OUT / ERROR
LED indicator	Safety outputs status / diagnostics (combined)

Work area

Repeat accuracy R

max.10 %

Other

For the approval according to UL the following applies

Operation only with UL class 2 power supply, or equivalent measures

Reliability values according to EN ISO 13849-1

	Monitoring of the safety guard position
Category	4
Performance Level	PL e
PFHD	3.7 x 10-9
Diagnostic Coverage (DC)	99 %
Mission time	20 y

In combination with Actuator CES-A-BBA, CES-A-BCAOperating distance

Distance s, actuator
Minimum distance for side approach direction	min.3 mm
Switch-on distance
With center offset m=0	20 mm
Assured switch-off distance Sar	max.40 mm
Assured operating distance Sao
With center offset m=0	min.18 mm
Switching hysteresis	min.2 mm

In combination with Actuator CES-A-BPAOperating distance

Distance s, actuator
Minimum distance for side approach direction	min.6 mm
Switch-on distance
With center offset m=0	22 mm
Assured switch-off distance Sar	max.58 mm
Assured operating distance Sao
With center offset m=0	min.15 mm
Switching hysteresis	min.1 mm

In combination with Actuator CES-A-BDA-20Operating distance

Distance s, actuator
Minimum distance for side approach direction	min.4 mm
Switch-on distance
With center offset m=0	21 mm
Assured switch-off distance Sar	max.41 mm
Assured operating distance Sao
With center offset m=0	min.19 mm
Switching hysteresis	min.2 mm

Explore the CES-A-W5H-01 097525 industrial spare part, meticulously engineered for performance and reliability. This industrial spare part is crucial for ensuring your machinery operates smoothly and efficiently. With CES-A-W5H-01 097525, you receive top-notch industrial spare parts designed for durability and optimal function.

The CES-A-W5H-01 097525 replacement component ensures that your machinery will operate more efficiently, cutting downtime and preserving output. These replacement components provide unmatched durability and dependability since they are made to endure the demands of industrial operation. You may quickly get the parts you need by ordering your CES-A-W5H-01 097525 spare part online and having it delivered to you.

A comprehensive selection of industrial spare parts suitable for different models and applications is provided by Euchner. In order to keep your equipment operating at peak efficiency, Euchner offers high-quality replacement parts that can be used for maintenance or to replace worn-out components.

You may rely on Euchner as your reliable supplier for high-performance industrial spare parts. To get the necessary spare parts, place an online order or stop by our store. You can invest in efficiency and quality for your industrial machines by using CES-A-W5H-01 097525. Our industrial spare parts are made to the highest specifications and provide dependable solutions for all of your equipment requirements.

Euchner ensures that you find the right spare parts next to you or available online. Order now and experience the difference in equipment performance with Euchner CES-A-W5H-01 097525. Invest in industrial spare parts that provide dependable service and keep your operations running smoothly.

Delivery terms

We offer convenient and flexible delivery terms to all our customers. No matter where you are, we will ensure fast and reliable delivery of your order.

Basic delivery conditions:

• Geography of delivery: We deliver throughout UK. Regardless of your location, you can be sure that your order will be delivered as quickly as possible.
• Delivery time: delivery time depends on your location and the delivery method you choose. We offer various options, including express shipping, to make sure you receive your order as quickly as possible.
• Delivery costs: Delivery costs are calculated individually depending on the weight, dimensions of the goods and the destination. We are committed to offering our customers competitive shipping prices.
• Delivery methods: We work with leading logistics companies to ensure safe and timely delivery. You can choose the delivery method that is most convenient for you.
• Order tracking: once your order has been placed, you will receive a tracking number so that you can know the status and location of your order at any time.
• Additional services: we also offer insurance and packaging services to make sure your item arrives safely.