Emirel V3-01N

Voltage relay V3-01N Emirel
Sale of Emirel products with worldwide delivery. We have a complete catalog of products of this brand. If you didn’t find something on the site, leave a request. The manager will call you back and help. Our current product range covers more than 90 percent of your needs, no matter what sector you are from (automotive, financial services, chemicals, pharmaceuticals or mechanical engineering, ...)

Competitive Prices
Competitive Prices
Lowest prices among our industrial parts reseller competitors
Extensive Product Range
Extensive Product Range
Thousands of industrial components and numerous suppliers
Swift Delivery
Swift Delivery
Reliable delivery of industrial spare parts worldwide
Sale of any product from the catalog Emirel
Brand
Emirel
Model
V3-01N
Country
Italy
Type
Voltage relay
TECHNICAL FEATURES AND REGULATIONS VM Max set point. The regulation is made by a trimmer on the front, in % of the nominal voltage (0÷+20%). Vm Min set point. The regulation is made by means of the trimmer on the front in % of the nominal voltage (0÷-20%). T Timer (0,5÷31,5 sec) - The regulation is made by means of the trimmer. It is activated when one of the two set points is overcome. At the end of the set period the output relay changes over. During the time TM the leads AM and Am are flashing. PHASE FAILURE Il V3 01N detects the phase failure basing on the principle that the amplitude and the phase of the “back voltage” are not equal to the phase and the amplitude of the mains voltage. By back voltage it is intended the voltage generated by the motor and appearing on the wire - motor side - after the phase has been interrupted or the wire has broken. VISUALIZATIONS ON GREEN LED: supply on AM, Am RED LED: VM or Vm has been overcome; the led flashes, after the time T the led is ON. L1,2,3 YELLOW LED: it lights on when the phase sequence is L1, L2, L3; it is Off with the different sequence. RESET: automatic. MODE OF OPERATION With the regulations on the front it is possible to fix one set point MAX and one set point MIN in order to have a control band. The set points and the phase sequence (L1, L2, L3) are connected to the same output relay. The output relay is normally on and it goes off when the voltage goes out of the fixed band (both above VM or under Vm), or when the phase sequence is not L1, L2, L3. When the phase sequence is L1, L2, L3, the output relay is ON and the yellow LED is ON. When a phase fails the relay is off; the V3-01N is self supplied from 2 phases, if one on these fails the leds are off or partially turned on (in presence of the “back voltage”); if the 3rd phase fails the yellow led flashes and Am is ON. POSITIVE SAFETY The relay is normally ON and it goes OFF when it is in alarm. INSTALLATION The setup of the thresholds VM and Vm and the tripping time TM are made by trimmers on the front of the device. (Wiring to an electrical board with a differential relay and a sectionalizing switch). The length of every wiring must be less than 30m. INPUT: 5-3-1 (1,2 kW/V) 230Vac / 380Vac / 415Vac. If the pins are not connected in the order L1, L2, L3, the device will be in alarm. It is requested that the pins 5-3- 1 correspond to the phases L1, L2, L3. The YELLOW LED must be ON. OUTPUT: 1 output relay with two change over contacts (5A-230 Vac) resistive load 11-10 / 14-15 NC Device not supplied 11-12 / 14-13 NO or in alarm Insulation between input and contact: VDE 0110 - IGR C/660 Insulation of the contact: VDE 0110 - IGR C/250 SUPPLY (pin 3-5) 2VA - 50÷60 Hz. Self-supplied by the voltage to be monitored. 100/220/230/380/400/415 Vac. RANGES 100 / 220 / 230 / 380 / 400 / 415 Vac. CASE • Self-extinguishing ABS. SIZE: 45x70x110 mm for DIN rail. Accessories available on request: E 405B transparent protection fitted for tight closure. WORKING TEMPERATURE: 0÷70°C WEIGHT: 0,300 kg COLOUR: grey
FUNCTION The voltage relay V3 01N monitors the overvoltage (VM) and the undervoltage (Vm) and the phase sequence L1, L2, L3 in an alternating three phase mains. Adjustment range +20% -20% of the nominal voltage. USE Control of a three phase mains.

Delivery terms

We offer convenient and flexible delivery terms to all our customers. No matter where you are, we will ensure fast and reliable delivery of your order.

Basic delivery conditions:

  • Geography of delivery: We deliver throughout Great Britain. Regardless of your location, you can be sure that your order will be delivered as quickly as possible.
  • Delivery time: delivery time depends on your location and the delivery method you choose. We offer various options, including express shipping, to make sure you receive your order as quickly as possible.
  • Delivery costs: Delivery costs are calculated individually depending on the weight, dimensions of the goods and the destination. We are committed to offering our customers competitive shipping prices.
  • Delivery methods: We work with leading logistics companies to ensure safe and timely delivery. You can choose the delivery method that is most convenient for you.
  • Order tracking: once your order has been placed, you will receive a tracking number so that you can know the status and location of your order at any time.
  • Additional services: we also offer insurance and packaging services to make sure your item arrives safely.
Important information:
- Please provide an accurate delivery address when placing your order to avoid delays and delivery errors.
- Please note that customs duties and taxes on the destination country may apply depending on the situation. These costs are not included in the cost of the goods and delivery and must be paid separately.

We make every effort to make the delivery process as convenient and fast as possible for you. If you have any questions or need additional information, our support team is always ready to help you.