Emirel CS 39S

USE It is indicated for monitoring the active power of a load, considering the “direction” of the power (ex. motor connected to the network). See Examples A, B and C at page 4. INPUTS: (form factor 1,11) • Current: pin 1-2 (permanent overload 200%). It is fitted for direct connection or through a CT../5 or ../1 according to maximum value of the input current. • Voltage : pin 4-6-8 400Vac - other voltages on request - The phase used to measure the current (amperometric phase) must be connected to pin 4. The wiring of the other two phases is made without any specific sequence. VISUALIZATIONS ON GREEN LED supply on R RED LED it is ON if the active power has the verse for which the V and I outputs are active. G YELLOW LED it is ON if the active power has the verse for which the V and I outputs are not active. GALVANIC SEPARATION The supplies of the input and output section are not in common. The two sections are optically separated by a linear coupler, without frequency conversion. INSTALLATION (wiring to an electrical board with a differential relay and a sectionalizing switch) see: fig. 3, 4 for 3-phase mains fig. 5, 6 for 1-phase mains The length of every wiring must be less than 30 m. CURRENT INPUTS pin 1, 2 (built-in CT 1,5VA) Model X: 0,1÷1A Model Y: 0,5÷5A Permanent overload 200%. VOLTAGE INPUTS Frequency 50Hz Input Resistance = 800kW pin 4-6-8 100Vac(line voltage)-0,25mA (0,05VA) 400Vac(line voltage)-0,25mA (0,17VA) Maximum threephase voltage 415 Vac. For voltages higher than 415 Vac apply: - M 08: Three Phase Drop Resistances In order to ensure the necessary insulation, in the applications with voltage higher than 415 Vac the amperometric phase must be always connected by external CT. OUTPUT The V and I outputs are active if the wiring of current is in such a way that the red led is ON (the yellow led is OFF). VOLTAGE OUTPUT pin 12-10: 0-10V (+ on pin 12) load higher than 10 kW. CURRENT OUTPUT Pin 11-9 (current outgoing from pin 11) max load 500W Model A: 4-20-mA Model B: 0-20 mA Max error 1,5% (25°C) with input current > 1/10 of the full scale. RESPONSE TIME < 200msec. 10%÷90% SUPPLY 2,5VA - 50-60Hz - Tolerance: ± 10% 16-15: 230Vac (or 24Vac) RANGES The device can be applied either with a CT/5, or with a CT/1. The device must work between 10% and 100% of the CT. CT SELECTION It is requested to choose the CT having a full scale a bit bigger than the maximum load current. (ref. to TAB A for 3-phase line and to TAB B for 1- phase line). Ex.: I = 15A. The nearest CT is 50/5 or 50/1. With one passage of the current wire through the CT, 1/3 only of the current is used (power will be lower due to cosφ<1). With three passages through the CT the current “seen” by the CT will be: 15x3 = 45A, so that almost the whole current range is used (see fig.2). Consequently the outputs will be 3 times higher than the values available with one passage only. Ex.: I = 15A - CT 50/5 - V = 400 Vac with 3 passages through the CT, the analog output 0-10V reads out V = 7,2V, and the effective value is Vu : 3 = 2,4 V. SIZE 45x75X115 mm - DIN rail Accessories available on request: E 405D: transparent cover fitted for tight closure. IP protection class: 40. WORKING TEMPERATURE: 0÷70°C WEIGHT: 0,300 kg COLOUR: grey.

Explore the CS 39S industrial spare part, meticulously engineered for performance and reliability. This industrial spare part is crucial for ensuring your machinery operates smoothly and efficiently. With CS 39S , you receive top-notch industrial spare parts designed for durability and optimal function.

The CS 39S replacement component ensures that your machinery will operate more efficiently, cutting downtime and preserving output. These replacement components provide unmatched durability and dependability since they are made to endure the demands of industrial operation. You may quickly get the parts you need by ordering your CS 39S spare part online and having it delivered to you.

A comprehensive selection of industrial spare parts suitable for different models and applications is provided by Emirel. In order to keep your equipment operating at peak efficiency, Emirel offers high-quality replacement parts that can be used for maintenance or to replace worn-out components.

You may rely on Emirel as your reliable supplier for high-performance industrial spare parts. To get the necessary spare parts, place an online order or stop by our store. You can invest in efficiency and quality for your industrial machines by using CS 39S . Our industrial spare parts are made to the highest specifications and provide dependable solutions for all of your equipment requirements.

Emirel ensures that you find the right spare parts next to you or available online. Order now and experience the difference in equipment performance with Emirel CS 39S . Invest in industrial spare parts that provide dependable service and keep your operations running smoothly.

Delivery terms

We offer convenient and flexible delivery terms to all our customers. No matter where you are, we will ensure fast and reliable delivery of your order.

Basic delivery conditions:

• Geography of delivery: We deliver throughout Great Britain. Regardless of your location, you can be sure that your order will be delivered as quickly as possible.
• Delivery time: delivery time depends on your location and the delivery method you choose. We offer various options, including express shipping, to make sure you receive your order as quickly as possible.
• Delivery costs: Delivery costs are calculated individually depending on the weight, dimensions of the goods and the destination. We are committed to offering our customers competitive shipping prices.
• Delivery methods: We work with leading logistics companies to ensure safe and timely delivery. You can choose the delivery method that is most convenient for you.
• Order tracking: once your order has been placed, you will receive a tracking number so that you can know the status and location of your order at any time.
• Additional services: we also offer insurance and packaging services to make sure your item arrives safely.